En construisant votre propre éolienne, vous aurez l’occasion d’en apprendre davantage sur l’énergie et la technologie durables à l’aide du micro :bit, des blocs de construction et du kit d’action climatique. Ce projet est un excellent moyen de comprendre comment la technologie peut être utilisée pour réduire notre dépendance aux sources d’énergie non renouvelables et lutter contre les changements climatiques.

En suivant les étapes ci-dessous, vous allez construire et coder une éolienne simulée capable de compter les révolutions nécessaires pour alimenter une maison ou une communauté avec de l’énergie renouvelable.

Guide de construction

À l’aide du diaporama ci-dessous, trouvez les pièces dont vous avez besoin dans la première image. Ensuite, utilisez les flèches < > pour visualiser les étapes de construction pour compléter le projet.

  • Long white rail block to be used as the base
  • White rail block with two square blue blocks attached at each end
  • Three white rails one added on top of the blue blocks and a another white rail enclosing the sire
  • Black sero motor inserted into the back of the almost closed tower, pushed through a rectangle in the white rail on the right.
  • Last white rail clipped to the blue blocks enclosing the motor. With the wire of the servo through the hole in the last white trail block
  • Attaching completed white tower to large green base.
  • Completed white tower on the green base with the blades of the turbine being attached. Three small images on the side there are three smaller pictures. 1. a circular green block. 2. Circle green block with four 2d square blue blocks. 3 Rectangular green blocks on top of the flat blue blocks.
  • Attach turbine blades to the tower
  • Breakout board attached to the large green base
  • plug mirco bit into the breakout board that is attached to the green base
  • Add dial pressed to the green base
  • Close up areal shot of the dial, breakout board, and tower. Attack all the times matching symbols when needed.